Mixing of Thermal Discharges at Low Froude Numbers
A study was performed to develop an optimum configuration for the discharge canal of a cooling lake. The objective was to minimize the initial mixing at the end of the discharge canal,...

Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...

Force and Pressure Measurements in Spillway Plunge Pools
Plunge pools are often used to dissipate energy from high head spillways with flip bucket terminal structures. Conventional design of plunge pools has been based on a program of mobile...

Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...

One- and Two-Dimensional Analysis of Flow in Hotophia Creek, MS
A numerical experiment on the influence of a sand bar encroachment on the stream flow pattern is reported. The results of a two-dimensional analysis were compared with results of an equivalent...

Factors Affecting Accuracy of Slope-Area Discharge Determination of the September 1992 Flood in Raven Fork, Western North Carolina
For the flood of September 10, 1992, in Raven Fork, Swain County, North Carolina, a peak discharge of 460 cubic meters per second was computed by using the slope-area method. Accuracy...

Roughness Coefficient in Mountain Rivers
River discharge estimations require an evaluation of the river flow resistance that generally is related with Manning's roughness coefficient. The literature suggests different ways of...

Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...

Chezy Formula Versus Theory and Common Sense
Using the theoretical concepts of the uniform flow formula and the inverse solution of the Chezy equation it is shown that a channel shape may have considerable influence on the value...

Design of Manning's-Rougness-Coefficient Study in New York State
Field-collected hydraulic data can be used to compute roughness coefficients for channels with different hydraulic characteristics. Suggested criteria for the design of a roughness-coefficient...

An Analysis of Flow Velocity Profiles, Stream Bed Roughness, and Resistance to Flow in Natural Gravel Bed Streams
The characteristics of 82 flow velocity profiles were analyzed from nine different gravel bed stream reaches. A statistical test of the linearity of flow velocity profiles indicates that...

A new approach for the estimation of extreme roughness in torrents by Hydraulic and Photogrammetry
In this paper we present an approach to estimate extreme roughness in torrents based on the transformation of an irregular bed geometry of a torrent reach into a geometrically well determined...

Study of Friction Factors in the Upper Reaches of the Rio Grande
The purpose of this study is to investigate the determination of Manning's roughness in the upper Rio Grande river basin and compare results to other studies where Darcy Weisbach friction...

Evaluating Flow Resistance Using Height of Roughness Protrusions
On the basis of field measurements on the Sumava mountain rivers heights of roughness protrusions have been used for calculation of flow resistance. The result resistance equations, compared...

Flow Resistance of High-Gradient Gravel Channels
The flow resistance in terms of the friction factor for bank-full or high in-bank flows for 120 high-gradient gravel-bed rivers are examined. The friction factor f was divided into grain...

Roughness Coefficients for High-Gradient Channels in New York State
Manning's roughness coefficients (n values) were computed for a range of flows at six streams in New York State (USA) that have high energy gradients (greater than 0.002) and large median...

Bias in Regression Estimates of Manning's n
Selected equations for estimating roughness for gravel-bed streams were tested using a composite data set containing much of the data used to define the equations. All equations tested...

Bed Load Roughness in Supercritical Flow
A supercritical concrete channel has been proposed for Mission Creek located in Santa Barbara County, California. The proposed channel could transport gravels and cobbles as bed load during...

Bed Load Prediction in Steep Mountain Rivers
The characteristics of the stream channel morphologies in a very steep mountain ravine are explained by the data obtained through the longterm field observation. The bed load transportation...

Particle Dynamics and Bed Level Adjustments in a Mountain Stream
The focus of the study was the interaction of coarse bedload sheets with a near-static bed. At a critical discharge bed sediment was transported from upstream sources through the study...

 

 

 

 

Return to search